Alati i uređaji za popravak motora
Šifra: ROT VR5
Robins Valve Grinding Machine W/Variable Speed Chuck, Standard Ball Chuck ( 0.0004") Range 4mm-14mm.
Standard equipment:
Quick action air control with six precision ball chucks
Precision tool steel chuck vacuum hardened - valve stem diameter range from .157" to .551" (4mm to 14mm) - optional chucks available for larger diameter range - optional equipment at an additional cost
Dovetail type guides
Motor controller converts single-phase input power to three-phase main grinding motor
Variable valve speed up to 250Rpm
Equipment for plane grinding and chamfering with micrometer and adjustable V-block
Equipment for main wheel and face wheel dressing mounted on the machine
Main wheel diameter 7" (180 mm), general purpose, without mounting, supplied separately
Diamond for main wheel dressing
Cast wheel diameter 3" (75 mm), general application Not mounted, supplied separately - optional equipment at an additional cost
Diamond wheel for surface layer dressing
Tools and wrenches, including tool for servicing/mounting the chuck
Transport dimensions: 40 "W X 32 "D X 24 "H (1,016mm X 812mm X 609mm)
Transport weight: 420Lbs (191Kgs)
Electrical requirements: Vr5 Available in 2 versions: 115V, 20A, 60Hz, 1Ph or 230V, 10A, 50Hz, 1Ph.
Voltage must be specified when ordering the machine.
Translation based on "artificial intelligence"
Opis
Robins Valve Grinding Machine W/Variable Speed Chuck, Standard Ball Chuck ( 0.0004") Range 4mm-14mm.
Standard equipment:
Quick action air control with six precision ball chucks
Precision tool steel chuck vacuum hardened - valve stem diameter range from .157" to .551" (4mm to 14mm) - optional chucks available for larger diameter range - optional equipment at an additional cost
Dovetail type guides
Motor controller converts single-phase input power to three-phase main grinding motor
Variable valve speed up to 250Rpm
Equipment for plane grinding and chamfering with micrometer and adjustable V-block
Equipment for main wheel and face wheel dressing mounted on the machine
Main wheel diameter 7" (180 mm), general purpose, without mounting, supplied separately
Diamond for main wheel dressing
Cast wheel diameter 3" (75 mm), general application Not mounted, supplied separately - optional equipment at an additional cost
Diamond wheel for surface layer dressing
Tools and wrenches, including tool for servicing/mounting the chuck
Transport dimensions: 40 "W X 32 "D X 24 "H (1,016mm X 812mm X 609mm)
Transport weight: 420Lbs (191Kgs)
Electrical requirements: Vr5 Available in 2 versions: 115V, 20A, 60Hz, 1Ph or 230V, 10A, 50Hz, 1Ph.
Voltage must be specified when ordering the machine.
Translation based on "artificial intelligence"
Tehničke specifikacije
Zamjene
Pitajte o cijeni
[email protected]